Loading... Please wait...
  • Suppliers of Snake Repellers
  • Solar powered snake repeller

Solar SNAKE REPELLERS

US$50.90
Shipping:
US$10.60 (Fixed shipping cost)
Quantity:

Product Description

The Solar powered Snake Repeller uses vibration technology to deter dangerous reptiles from entering areas where they can be harmful to your family and pets.

  • Easy to install and use
  • Replaceable batteries
  • Use around gardens, yard, orchard, farm, animal enclosures, etc.
 Quantity  Price                    
 One unit  $85.00
 Two units  $72.00  - Recommended Minimum
 Four units  $140.00                
 Six units  $204.00
 Eight units  $264.00
 Ten units  $320.00

 

How the Solar Power Snake RepellerWorks
The snake repeller emits a variable frequency ultrasonic pulse/vibration to repel snakes Frequency: 400Hz-1000Hz
The pulse/vibration travels through the ground up to an area of protection of up to 650 square metres, or a circle of 15m radius, depending upon soil conditions.
The snake uses sensors in it's body to detect the vibration. The vibrations from the unit irritates the snake, simulates danger and repels it from the area.
The solar panel supplies power to a rechargeable accumulator battery during the daylight hours
Once fully charged, the accumulator battery can supply enough power for 24 hours of operation daily.
The unit will still work in part shade, however optimum battery life is achieved by a better charge in full sunlight

For protecting larger areas, it is recommended that a number of units be used together and placed so that their areas of coverage overlap.
We recommend using 2 units 25m apart or as required depending on the 
area size.
The Solar Power Snake Repeller is effective for all types of snakes. However, whilst we are confident that it will reduce the incidence of snakes on your property, we cannot guarantee that it will repel all snakes, all of the time!
You should therefore continue to exercise caution with regard to the potential presence of snakes on your property!

Installation
- Prior to using the unit, charge the solar panel for 2 days outside in the bright sunlight.
- Remove the protective plastic coating from the aluminium probe.
- The insertion of the probe into the ground is a crucial part of the process.  It is essential that care is taken not to damage the tip of the probe during the installation
- Select an area of firm, dense ground for the best result. Sandy soil will reduce the area ofprotection; clay will provide the greatest area of protection and irrigated or waterlogged soil should be avoided.
- Do not use a hammer to insert the probe into the ground as this can damage both the multi-pulse vibrator and the housing for the solar panel.
- The preferred method is to insert the probe into the ground is to first create a pilot hole. This can best be done by driving a metal or hardwood rod into the ground that has the same diameter as the probe or slightly narrower, but not wider.
- The depth of the hole should allow for at least 100mm of the aluminium probe to be above the surface.  
- Once the required depth has been reached, remove the rod and insert the aluminium probe firmly into it.  
- A tight fit is essential for the vibration to travel freely.
- If necessary, place a block of softwood over the end of the probe and gently press the probe into position.   
-
Never use the solar panel to press the probe into the ground.
- Once the probe is in place, connect the fully charged solar panel to the cable inside the probe; gently press the solar panel into place and the unit is ready for use.
- To start the unit press the On/Off button on
the underside of the head.
- The rechargeable 1.2v/800mAH "AA" Ni-Cd battery is easily replaced by unscrewing the external battery compartment door located on the underside of the unit head.
- Check the door is correctly refitted to prevent water damage.
The unit is weatherproof but not waterproof. Whilst rain on the unit is not a problem, the top of the aluminum probe must never be under water. Ground water must not be allowed to seep down inside the base pole or the vibration mechanism maybe damaged.
- If there is any likelihood of hail the unit should be covered or removed.

Warranty
This product is warranted by the manufacturer against faulty material and or workmanship for 6 Months from the original Date of Purchase. A copy of your original invoice must be produced to validate the Date of Purchase, or the Warranty shall be invalid. The manufacturer's obligation under this Warranty is to repair or replace the unit at their discretion. This Warranty covers intrinsic component and manufacturing defects only and excludes any damage to parts or materials due to misuse, incorrect procedures, accidental damage, and negligence whether intentional or by accident. In no event shall the manufacturer be liable for any damages whatsoever arising out of or connected with the use or misuse of this product. The return postage costs are at the buyer's expense.

 

Warranty Information

Warranty
This product is warranted by the manufacturer against faulty material and or workmanship for 6 Months from the original Date of Purchase. A copy of your original invoice must be produced to validate the Date of Purchase, or the Warranty shall be invalid. The manufacturer's obligation under this Warranty is to repair or replace the unit at their discretion. This Warranty covers intrinsic component and manufacturing defects only and excludes any damage to parts or materials due to misuse, incorrect procedures, accidental damage, and negligence whether intentional or by accident. In no event shall the manufacturer be liable for any damages whatsoever arising out of or connected with the use or misuse of this product. The return postage costs are at the buyer's expense.

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

Customers also viewed

Click the button below to add the Solar SNAKE REPELLERS to your wish list.